-
Started using build .60 today. Trying to get white whale configured to send CV and trigger/gates from CV0-CV3 to modular. I did successfully get note out of CVA and B [though I don't believe i had them scaled properly] but couldn't get triggers to work. Anyone have a scene they could share so I could take a look at a correct operator routing for this functionality?
-
for CV you'll need to multiply by 8 for 1v/oct scaling
for triggers you'll need to multiply by 32767 (max) as they're likely just sending 0/1 to the CV which is a tiny tiny voltage. -
Great! multiply is working as expected... now I have a question on getting triggers out of CV0-CV3.
If I use a TOG operator I get a trig on every other output, not on each step. What operators would I use to get a steady output on every step? I've been playing with GATE and LOGIC with no success. Can't seem to get the CV value to return to 0 after rising to 32627. It just holds at that value. -
Make sure the trig on your MUL op is set to 1
-
when MUL Trig is set to 1 I get 0 - 32627 - 0 - 32627 out of the TOG operator, but it is for every other step not each step. how would I get the TOG to return immediately to the resting state so that the next step would send out the full value trigger? ...I'm sure I'm missing something simple.
-
so it looks like this topic was discuss before... is this the most streamlined approach? http://monome.org/community/discussion/17941/meadowphysics-scene-for-aleph#Item_17
-
oh I see the problem: WW only ever outputs 1and never 0
that's annoying... hmmm... there must be an easier way to do it
idk
can you get there by slewing the cv outs? -
Not sure about slewing. @galapagoose do you have a recommended approach for the trigs?
-
exchanged emails with Brian. He is looking into whether there is a bug with the WW operator.
-
the issue is that the clock input on the WW needs a 1/0 alternation to signal the up/down of the triggers. try metro -> toggle -> ww.clock
-
excellent! metro -> toggle -> ww.clock working perfect. Thank you!
