monome

Bump? Ftdi issues maybe?

Bump bumppity bump??

hey-- which serialosc are you using? i'd suggest updating to the most recent-- check the setup guide which is new.

Hey Brian
Rocking the new version and still have to unplug for it to show up? Not an issue, just my arc shows up?

what happens if you start the patch with nothing plugged in.

then add the 128.

Interesting question, I shall try and report back.....

The box isn't populated with the 128 only the arc, and when I plug it in it shows up. Same with the arc, the patch loads up no problems. It's like it isn't remembering the 128 when I open it up? It used to before I added the arc?

you're using the newest serialosc.maxpat?

have you installed griddle at some point?

try deleting /Users/{you}/Library/Preferences/org.monome.serialosc/

Never used griddle. Will try and remove the monome serial link. Thanks and yes newest serial osc Brian

@tehn

When I start up a patch in Max 5 runtime and Max 6 with the monome unplugged the list isn't populated, and 128 shows when I plug it in, but my arc doesn't show ,and i have to unplug the arc and plug back in. Getting weirder?
The link above doesn't exist in my system at all under users or my profile?

your user library folder is hidden by default.

http://osxdaily.com/2011/07/04/show-library-directory-in-mac-os-x-lion/

but i'm a bit confused. what were you opening the patch in before? (when only the arc showed up)

not the best advice, but what i would do in that situation is reinstall serialosc, replace the serialosc.maxpat with the zeroconf-serialosc.maxpat
http://monome.org/docs/_media/app:serialosc:zeroconf-serialosc.maxpat.zip
(unzip the file, find serialosc.maxpat and copy it to your Max6/patches folder)
reinstall the Max zeroconf externals

reboot

Thanks mate will try that. What was happening was in max 5 and 6 only the arc was showing. Now with both 128 and arc connected none of them show up? I have to unplug and re plug them in for them to show up in patches. I have installed the new serialosc some weeks ago and max 6 runtime and not encountered this issue at all until recently. No changes made to my system at all? Hope that clarifies. Anyway will try and do a reinstall as I wanted to add the serialosc zeroconf anyway to try Pages with the new serialosc

@tehn

deleting that path in the library appeared to do it mate, thanks. yet to do a reboot, but presume it will be fine

Hi all back again with same issue. Have to unplug and plug in my 128 for it to be recognised in any patches when I try to connect. Max 5 and max 6 runtime? The constant unplugging of my monome sometimes causes kernel crashes that prompt me to restart the computer? Any ideas?

Mac 10.8.?

@fluxsta
I too am running 10.8.3
No problems on my side. I had a couple of kernel issues when testing my grid + arcs on an older mini mac.
On my newer laptop I can (knock on wood) normally hot swap the units and have the 64 plus Arc working at the same time, no problem.

FYI and FWIW I have the new serialosc plus the zeroconfig files installed in my Max folder.

Ciao

Paul

@fluxsta this is a known FTDI issue on some systems. what OS are you using?

@tehn

Think it is latest Mac OS. Is it 10.8.3? You had kindly offered me suggestions before and it was ok for a while but now back to the plug/unplug scenario. 128 flashes upon Mac start up though?

Pages is also a no go now with all set up followed correctly and new serialosc as well as this issues but I have sent message to phortran about that anyway

ok-- there's a fix that needs to be made to the serialosc.maxpat for zeroconf. i'll prioritize that for the next couple days.

Great stuff Brian thanks :-)