steve_duda

  • trolled.
    I'd prefer this thread is just deleted. Raja, you're the reason I stopped visiting these forums, didn't realize you're the same person but I'm really not surprised to find that out. I'll see if I can get my backup to …
    steve_duda ·  August 2013
  • trolled.
    I'll ignore more than just this thread. It's a shame that these forums went from a nice resource of information sharing to a wasteland of opinion spouting. There was already the rest of the internet for that.
    steve_duda ·  August 2013
  • trolled.
    > Don't take it personally, i just learned from your example is all :) please point me to where I was name-calling to strangers on this forum, besides in this sentence, prick.
    steve_duda ·  August 2013
  • trolled.
    Hi Guys, forget this thread please, I certainly don't need people calling me a coward and whatever else. I really don't appreciate being called names when I've done absolutely nothing. I have given my 40h and 256 away to friends …
    steve_duda ·  August 2013
  • Molar VSTi (1.0b29 - 21 Nov 2010)
    My guess is 0-32 is the I/O channels, you probably had the .cfg set to 16 stereo outs
    steve_duda ·  January 2012
  • looking for nord modular.
    I have a G1 "rack" that doesn't get a lot of use.. email is in my profile
    steve_duda ·  December 2011
  • Molar VSTi (1.0b29 - 21 Nov 2010)
    judging by the crash report, its a problem with the AU build, revert to a prior version or use the VST/VST Host.
    steve_duda ·  December 2011
  • Molar VSTi (1.0b29 - 21 Nov 2010)
    Molar only works with monomeserial, but that isn't your issue. Are you sure the config is located (Welcome to Molar! displays when you press play in the host, not "config file missing!") Maybe try a different build of Molar http:…
    steve_duda ·  December 2011
  • sprintf, down to earth please!
    string is an abstract term for data (usually consecutive bytes in RAM) intended for holding "text". In this case, bytes (as char is used), but a "string" can in also be wide (e.g. 16-bit for unicode). it is important to under…
    steve_duda ·  August 2011
  • Molar VSTi (1.0b29 - 21 Nov 2010)
    yes they are gzipped. You can send me one, if you're really just trying to find a single common path, its probably the easiest way.
    steve_duda ·  August 2011
  • Unofficial Molar VSTI Tips,Tricks,Tutorials and FAQ Collection Bucket
    or maybe there is no silence and you're mistaking the crude waveform drawing (is it all to the left of the green line? if so it isn't silence).
    steve_duda ·  March 2011
  • Molar metasequencing question
    I wrote that 2 1/2 years ago, I can't be too much help beyond saying that the lower-right LED is indicating meta overdub. I don't see anything in the code that indicates a way to shut off metasequencing :? not sure when that happened, I …
    steve_duda ·  March 2011
  • Unofficial Molar VSTI Tips,Tricks,Tutorials and FAQ Collection Bucket
    When I bounce perfectly cut loops why do they come into Molar with space before the first sound? it divides loops into 1/2/4/8 bars based on host tempo and source file length. It shouldn't be "adding space" but you might have a lo…
    steve_duda ·  March 2011
  • Molar basics
    > What am I doing wrong? I think the answer to all three posts is: "Load button->Init this row SEQs", after changing the row type. (if you're changing a row from loop type to oneshot type, or vice-versa). Or just chan…
    steve_duda ·  March 2011
  • Molar CC help
    128 uses a _128 config now. Maybe download the mac version zip, I think its in there. Renaming the 256 config should be fine also. You shouldn't need these files but you asked. http://www.xferrecords.com/Molar/MolarPCb28.zip http://…
    steve_duda ·  February 2011
  • Molar CC help
    you can send MIDI notes to trigger the pads (IIRC, its MIDI Ch3 or 4 to access the true press, channels 1 and 2 are for just triggering LED's). So you'd need to translate the CC your pedal sends to a specific note.
    steve_duda ·  February 2011
  • serialosc, proper
    [my phone sent duplicate post apparently]
    steve_duda ·  February 2011
  • serialosc, proper
    Is there any source/examples (ideally c, but perhaps java or python) that demonstrates how to be a client to serialosc? The osc protocol changes seem clear enough, but I'm not quite clear on how to locate serIalosc's listen port to establ…
    steve_duda ·  February 2011
  • Molar - Audio Output problem!
    You can put the VST in a subfolder, the .cfg files need to be top-level. you can do that on windows, on OSX it is tricky to locate a config file as querying the process runing location returns the path to the host, not the vst. I could make peo…
    steve_duda ·  January 2011
  • Molar - Audio Output problem!
    it really sounds to me like the config is missing. when you press play with Molar GUI open, do you see "Welcome to Molar!" ? Or "config file missing!" Or, you can also open Console.app system log and you might see: Molar c…
    steve_duda ·  January 2011
  • Molar Questions
    gate = duration scaling, not an audio gate (you can use another plugin for that).
    steve_duda ·  January 2011
  • Molar - Audio Output problem!
    config file MUST be in (MAC HD)/Library/Audio/Plug-Ins/VST change the welcome message and verify it is loading
    steve_duda ·  January 2011
  • Where is a good place to get free VST Insterments for Live 8
    This guys stuff is exceptional for the price (free): http://kunz.corrupt.ch/ there is a database of a bazillion free VSTi on http://www.kvraudio.com/get.php - just set the filters to "free" and your OS.
    steve_duda ·  January 2011
  • Molar Questions
    Monomeserial must be running in OSC mode- the prefix in MonomeSerial must match prefix on the config. Do you get "config file missing" when pressing play? If so please give more information (OSX/Windows, etc).
    steve_duda ·  January 2011
  • community: I need your help IDing this stuff.
    pfft you shoulda come to Bank Ultralounge... I played with deadmau5 for 2 1/2 hours.. he even jumped on the 256 for a bit :D
    steve_duda ·  December 2010
  • Molar VSTi (1.0b29 - 21 Nov 2010)
    @baubie are you referring to something with PPC and Timestretch? I'm not sure this version works at all on PPC, can you even open the GUI? FWIW I believe I have the unibin soundtouch included. I have no PPC to test on anymore. @malte, I t…
    steve_duda ·  November 2010
  • warping in molar
    @deanjkd, probably a samplerate mismatch. Molar is intended for 44.1 files and 44.1 host
    steve_duda ·  November 2010
  • Molar VSTi (1.0b29 - 21 Nov 2010)
    new build uploaded (b29): -migrated the code to VSTGUI 4 which means the following: 1) PPC is probably not working 2) you need OSX 10.5 or later 3) you may have a performance hit on WinXP for the rest of you it should mean GFX improvement…
    steve_duda ·  November 2010
  • warping in molar
    .125 can work for an 8 bar loop, you need to raise your Max Buffer Size in the Molar.cfg
    steve_duda ·  November 2010
  • Is there really a qualitative difference?
    I disagree there's an audible difference between hosts, this sort of stuff is propgated myth due to user error when doing a comparitive test. Panning laws can differ so it is important to make sure you aren't just hearing a gain differ…
    steve_duda ·  November 2010