herringson

  • unable to build libmonome on osx 10.10
    Ha, after beating my head against trying build serialosc manually by installing the necessary dependencies using homebrew I just typed "brew install serialosc" on a whim and BOOM, away it went, all done my arduinome works now on 10.10. G…
    herringson ·  January 2015
  • unable to build libmonome on osx 10.10
    I have an arduinome and until recently have been running it on 10.9. To get it working I had to re-compile serialosc from source, I'm not sure why. It was to do with serialosc not recognizing the teensy's I was using, I think the same wou…
    herringson ·  January 2015
  • arduinome Eurorack Modules
    The function below does seem to parse the serial looking for an arduinome. if( strncmp(buf, "a40h", 4) == 0) { // this is probably an arduinome mdesc.protocol = eProtocol40h; mdesc.device = eDeviceGrid; mdesc…
    herringson ·  December 2014
  • app : The Party Van
    The party van can only take 4 inputs at once but you can decide which soundcard channels feed those four inputs. It's in the I/O section of the audio settings.
    herringson ·  September 2014
  • Serialosc won't connect to arduinome on fresh 10.9.4 install
    OK so I fixed this by recompiling serialosc from source and installing it. Why did this help? I DON'T KNOW. I guess the serialosc on github is newer than the one in the monome installer? Or it's some kind of permissions problem that inst…
    herringson ·  August 2014
  • sum - Mira mod
    @emergencyofstate I have been having a bit of a look at this today and have a proof of concept that should work with mira and would also reduce the number of UI components significantly in the base sum app. I'm not totally sure it will work ye…
    herringson ·  August 2014
  • Serialosc won't connect to arduinome on fresh 10.9.4 install
    bump! I've tried 10.10 now too. Anyone here using 10.9.4 or 10.10 with a uno based arduinome and serialosc?
    herringson ·  August 2014
  • Arduinome 128 with starfire board and unsped shield / barduinome 128 hack
    @cherryhest !! I ended up switching out the single arduino in my 128 for two teensy 2.0 ++ boards, they run the arduinome firmware just fine and that way I can use standard serialosc with the 2 8x8 grids. The only issue I have so far is that 10.9.…
    herringson ·  August 2014
  • No LED Feedback in certain apps of Monome_Sum
    yeah I've had this happen, I'm using two arduinomes tiled into a 128. Doesn't seem to happen consistently.
    herringson ·  August 2014
  • monome_sum v1.1
    @square_wave The previous comment is correct, if Sum audio is being sent to the outputs 1-2 of your avid rack, Live won't see this as an input. I find the easiest workaround for sending audio between applications is to use an ADAT loopback. F…
    herringson ·  June 2014
  • Current up-to-date routes for a custom arduinome build
    I'd suggest checking out http://biboboards.bigcartel.com/ It looks like he still has boards available for the Sparkfun button PCB and 40h Logic boards. This wouldn't be an arduinome per-se but would be a 40h clone with Sparkfun buttons. …
    herringson ·  May 2014
  • monome_sum
    @gli I spend my days doing maths in my head to work out how to buy a 128 or 256 #oneday
    herringson ·  April 2014
  • monome_sum
    Also, the beams bit slightly confuses me, possibly due to not paying enough attention to the docs. The other bits I can hit the buttons and I understand what is happening. It might be cool if the UI somehow reflected the grid just for the this sec…
    herringson ·  April 2014
  • monome_sum
    First go with sum tonight, Sponsored by hefeweizen.
    herringson ·  April 2014
  • monome_sum
    Nice work! My arduinome 128 has been driving me mental, trying to get it to work with serialosc apps that span and all that. This just works. So fun, much easy. Video incoming.
    herringson ·  April 2014
  • Why so many monome sales?
    I have a self built Arduinome 128 and it was MLR that got me into monome in the first place. I can program in Max, I can work most any audio application that you throw at me and work in the audio industry for a living. I write and output music reg…
    herringson ·  March 2014
  • Monome/Arduinomeserial col offsets equivalent for SerialOSC?
    Thanks for the info @karaokaze I might look at making a patch that wraps the standard serialosc.maxpat and lets me do offsets. I'm trying to keep my toolchain as vanilla as possible but it's proving to be a challenge as everything seems …
    herringson ·  March 2014
  • monome_test_3 odd results, button/LED cabling wrong?
    Ah, you're using a monome logic board? In that case I'm not sure, I've only worked with arduinome shields sorry :)
    herringson ·  February 2014
  • monome_test_3 odd results, button/LED cabling wrong?
    Sounds like it. If all the lights go on you probably have the wrong header on your shield connected to the sockets on your Bibo board. If it's unresponsive then it's possible the cables are connected to the right place but are twisted or…
    herringson ·  February 2014