BRIANLIGHT

  • Hella Oontz a grid controller from Adafruit
    I would start testing the sketch to make sure that it works with one half of your 128 OONTZ setup. After that I would Experiment & get familiar with the Adafruit OONTZ/TRELLIS Arduino Libraries I'm sure it should be simple to adapt this ske…
    BRIANLIGHT ·  August 2014
  • Hella Oontz a grid controller from Adafruit
    You can try modifying this arduino sketch it would be a good starting point. it emulates the old 40h serial protocol the first ever. Will not work with SerialOSC https://github.com/rbnstubbs/trellis-monome
    BRIANLIGHT ·  August 2014
  • trellis - another DIY keypad
    Your right GreaterThanZero this is what I have produced so far. https://codebender.cc/sketch:32798 Does not work with serialosc at the moment. This firmware currently works with serial-pyio From Git. Tested on a Raspberry Pi & under Windows. S…
    BRIANLIGHT ·  April 2014
  • WTB: Unsped Arduino Shield
    Your best bet is to download the Eagle PCB files at http://unsped.blogspot.com/ & using a company to make a small batch of shields I would recommend http://www.seeedstudio.com/service/ you can probably cover your costs by selling the left over P…
    BRIANLIGHT ·  January 2014
  • WTB: Unsped Arduino Shield
    I would look into purchasing a few of these nice little pads from adafruit. http://www.adafruit.com/products/1616 I'm inches away at having a working monome firmware for these.
    BRIANLIGHT ·  January 2014
  • trellis - another DIY keypad
    I've purchased a few of these little button pads with hopes of making a Monome clone. I do know that they do not support variable brightness. But multiple button presses work wonderfully. Someone needs to write firmware to make these use the 40…
    BRIANLIGHT ·  January 2014
  • Serial-PyIO installation problem
    with print sys.path as described in your pastebin the output of running serial-pyio.py is brian@brian-laptop:~/serial-pyio/main$ ./serial-pyio.py ['/home/brian/serial-pyio/main', '/usr/lib/python2.6', '/usr/lib/python2.6…
    BRIANLIGHT ·  November 2009
  • Serial-PyIO installation problem
    ok here is the output of print sys.path '/home/brian/serial-pyio/main', '/usr/lib/python2.6', '/usr/lib/python2.6/plat-linux2', '/usr/lib/python2.6/lib-tk', '/usr/lib/python2.6/lib-old', '/us…
    BRIANLIGHT ·  November 2009
  • Serial-PyIO installation problem
    I have an error when trying to run trunk from svn first of all my system is running Ubuntu 9.10 & python 2.6.4 I've installed the pyttk 0.3 package from this site http://pypi.python.org/pypi/pyttk/0.3 I'm assuming pyttk was installe…
    BRIANLIGHT ·  November 2009
  • New version of serial-pyio
    No.... Arduinome support under windows?? last time I checked out svn in Linux Arduinome support was there??
    BRIANLIGHT ·  September 2009
  • Seeed Studio Rainbowduino??
    well I was thinking about making some monome like device with it I think this should be possible...?? you can communicate over a hardware Uart and SPI buses by itself maybe it's not possible but using it for what it was made for a LED display d…
    BRIANLIGHT ·  July 2009
  • Stickduino or Stampduino... monomini?
    unsped :: HELL YEAH!!!! :D I would love to have a little mini button board for my second arduinome shield that's sitting here assembled & ready for a button pad. linuxbarista:: yeah I think it would be awesome!!!! if the monome was round…
    BRIANLIGHT ·  June 2009
  • arduinome + linux
    Now my arduinome is detected at startup & everything seems to be working.... :D
    BRIANLIGHT ·  June 2009
  • arduinome + linux
    I've checked out a fresh copy from svn again thinking maybe somehow there was latency & I had and older copy & still get an error not the same as posted above. This error happens right after I select my device... File "/home/b…
    BRIANLIGHT ·  June 2009
  • arduinome + linux
    Ok I've checked out the latest svn & I'm now getting the following errors brian@Lightfoots-Linux-Desktop:~/serial-pyio/main$ ./serial-pyio.py INFO, 2009-06-08 12:03:02,473 MainThread: Starting Serial-PyIO INFO, 2009-06-08 12:03:…
    BRIANLIGHT ·  June 2009
  • arduinome + linux
    ummmm maybe that was me.. I tried the svn for serial-pyio under my Ubuntu 9.04 with my arduinome and tried most of the applications & they all seemed to work fine.. but if I python setup.sh --prefix=/usr/ install the appllication spits out an e…
    BRIANLIGHT ·  June 2009
  • Sparknome!
    I purchased the USB & SPI versions of the Sparkfun's color button pads & yeah there both sitting in my scrap electronic components box.. they both sounded like a good product it was an impulse buy for me..
    BRIANLIGHT ·  June 2009
  • HOW TO: Add an accelerometer to your Arduinome
    Yes with the Accelerometer I purchased from seeedstudio. I made no modifications to the most recent firmware version for the arduinome.. having the accelerometer on a breakout pcb makes things super simple.. though..
    BRIANLIGHT ·  June 2009
  • HOW TO: Add an accelerometer to your Arduinome
    With the latest firmware I've wired up my accelerometer just like your above diagram & the accelerometer I used works like a charm... Wiimote 3-Axis Accelerometer module - ADXL330 http://www.seeedstudio.com/depot/wiimote-3axis-accelerome…
    BRIANLIGHT ·  June 2009
  • My Seeed Studio Arduinome Finished & boxed..
    Thank ya... have you added any bling bling to yours?
    BRIANLIGHT ·  June 2009
  • Linux compatible apps
    There is a mlr like puredata patch Axiome http://docs.monome.org/doku.php?id=app:axiome but the file browser dialog box keeps appearing under my distro after I have selected a sound sample to loop you need to grab serial-pyio from svn to make use …
    BRIANLIGHT ·  June 2009
  • Twitter?
    http://twitter.com/brianlightfoot
    BRIANLIGHT ·  June 2009
  • Could you get an *ARDUINO* and a Monome talking to one another?
    On the possibility of a Computer free Monome well...... if your looking at making yourself a more portable one with a single board computer I think this would be more practical.. then Arduino & still have a cheap price tag on your parts... …
    BRIANLIGHT ·  June 2009
  • finished my guitarnome!
    fraking awesome.... I want one.. ;)
    BRIANLIGHT ·  May 2009
  • HOW TO: Add an accelerometer to your Arduinome
    Hello I was wondering with the remaining adc pins would it be possible to implement the I2C interface in the arduinome firmware to allow connecting the wii chuck via one of these http://www.seeedstudio.com/depot/wiichuck-a-wiinunchuck-break-out-bo…
    BRIANLIGHT ·  May 2009
  • way off topic.... could use your help......!
    clicked my vote +1
    BRIANLIGHT ·  May 2009
  • Holy cow RGB LCD buttons!!!???....
    I've just finished my arduinome this week using all the monome goodies at seeedstudio the 40h button pad this guy sells was super simple to solder up & wow super cheep the buttons have a nice clicky feel to them & the sparkfun button pa…
    BRIANLIGHT ·  May 2009
  • new app: axiome (puredata)
    Hello weng the link for your Browser patch is down.. I've tried using Axiome under Ubuntu Jaunty but that file dialog comes up over & over again & I can't use this application at all do to this bug... could you please fix your dow…
    BRIANLIGHT ·  May 2009
  • Holy cow RGB LCD buttons!!!???....
    or maybe use a button like this.. http://www.seeedstudio.com/depot/oled-push-button-110-p-346.html
    BRIANLIGHT ·  May 2009
  • Sparknome!
    Yeah I think it may be time to do that... or at least put links to all the documentation on the sparkfun.com site. but there's still no cable from sparkfun or a working Monome device that I've heard of yet.. No OSC or MIDI proxy.. for the …
    BRIANLIGHT ·  April 2009