robotjones

  • Monome mk avrdude: stk500_getsync(): not in sync
    Today I retroubleshot this problem. I uninstalled serialosc, I reinstalled FTDI 32-bit VCP driver, I downloaded and installed the new 12.03.12 Crosspack, and I run the code again: Derek-Joness-MacBook-Pro-15:~ derekrjones$ cd ~/desktop/mk/firmwa…
    robotjones ·  December 2012
  • Monome mk avrdude: stk500_getsync(): not in sync
    i tried different timings, and nothings working. Just a slew of these error 1 messages I may need to get my mk reflashed in-house
    robotjones ·  November 2012
  • Monome mk avrdude: stk500_getsync(): not in sync
    bump on this post. I am having issues loading the firmware "default" & "tilt" 8x8 from the latest github mk firmware I am working on OSX 10.6.8, monome kit from 2010 When i stop Serialosc (1.1e) and bridge AVR-ISP pins …
    robotjones ·  November 2012
  • MK kit buttons require hard push
    **Bump on this thread, I have a proper enclosure and my button presses are still much harder than what should be necessary
    robotjones ·  May 2012
  • new album: senescence | cassette + digital download
    Amazing release Smyth! This & your Sanibel CD are going into rotation today at WVFS Tallahassee radio station and will be spinning soon! WVFS can be streamed here: http://voice.wvfs.fsu.edu:8000/stream.m3u
    robotjones ·  April 2012
  • Monomers in South East United States?
    florida ftw! Representing el capital, Tallanasty. I work and mix live sound at my local radio station WVFS Tallahassee---we should have live monome show over airwaves
    robotjones ·  March 2012
  • mk encoder breakout
    @tehn: I'm referring to the ADC #s on my mk logic board @thee oh teaknee: they're labeled 3-8 on the encoder board and into ADC 2-7 (0 & 1 are being used for accelerometer)
    robotjones ·  February 2012
  • mk encoder breakout
    @ 'tini This patch is great! It recognizes my encoders on adc ports 2&3, now to get the 4 right hand side bars to move. Is this a simple numbers adjust or more complex?
    robotjones ·  February 2012
  • MK kit question. lights going out, but still works
    Yes I am using serialosc, and it still occasionally happens. I noticed another post that mentions resoldering the connections near ribbon cables might help--I'll try when I get home.
    robotjones ·  February 2012
  • mk encoder breakout
    I am not able to create this maxpatch mod anytime soon, as my experience is far more limited than I thought. Is there any way you could bang out a simple patch that works for basic cc mapping?
    robotjones ·  February 2012
  • mk encoder breakout
    Sounds groovy! I'll be working on my end to make a patch--would be my first attempt at messing with editing patches.
    robotjones ·  February 2012
  • MK kit question. lights going out, but still works
    Hello all, I would like to revive this post and issue. I have a similar issue with my mk64 when I run max apps like polygome or mlrv. When I start to bang on the buttons the LEDs frequently all go dim, or go out completely, but the audio continu…
    robotjones ·  February 2012
  • mlrv 2.2 [new version]
    @rawore on gcode page near top left of screen, look below the project home status bar, to left of search bar/option, link titled "new issue"
    robotjones ·  April 2011
  • mlrv 2.2 [new version]
    @rawore http://code.google.com/p/mlrv/issues/list
    robotjones ·  April 2011
  • mlrv 2.2 [new version]
    Is anyone else experiencing problems with triggering aux send? I'm having trouble getting auxsend or delay feedback to work with my mk64 in 2.0 & 2.1 and now 2.2 so it must be something I've got messed up. I have reinstalled F…
    robotjones ·  April 2011
  • mk firmware / serialosc
    WORDDDD all good in the hood. obrigado, tehn
    robotjones ·  April 2011
  • mk firmware / serialosc
    tehn thanks for all of your help Which old firmware should we revert to? if it's serialosc 0.8 how can I find installer? it's not on serial osc page (http://docs.monome.org/doku.php?id=app:serialosc) or on github
    robotjones ·  April 2011
  • mk firmware / serialosc
    OK, from your input I was able to successfully load firmware, and apps respond now. I'm having to press harder than with monomeserial to receive LED and button feedback, and when I ran zeroconf-test I received a white box I also just unp…
    robotjones ·  April 2011
  • mk firmware / serialosc
    all four zeroconf .mxo's are in max-external folder I am receiving 0 feedback from apps, but proper connection in serialosc.maxpat I just reran serialosc to read avrdude's response and even though I change 64mk.hex to mk.hex it says: …
    robotjones ·  April 2011
  • mk firmware / serialosc
    @tehn I changed my serial number to m0007391 and then to m0000000 but for neither did I get app response, although bonjour browser says its connected to osc.
    robotjones ·  April 2011
  • mk firmware / serialosc
    OK, I reflashed successfully after unloading FTDI, unloading serialosc, renaming using PirateRename, and then performing mk serialosc flash. AVR dude said "YEHAWWW" and so I reloaded the FTDI & serialosc and when I load monome_test…
    robotjones ·  April 2011
  • mk firmware / serialosc
    I'm having similar problems to zuchtfisch. I reinstalled Max, Serialosc, latest FTDI and tried to flash m0000000 and other # combos with no button feedback - I had proper response before I tried to flash firmware. after adjusting (or not) t…
    robotjones ·  April 2011
  • Surface mount replacement suggestion
    backside *yeah its messy
    robotjones ·  March 2011
  • Surface mount replacement suggestion
    frontside 10uf negative hole lifted
    robotjones ·  March 2011
  • Need a Faceplate?
    @Willium 070 Thanks for the amazing red 8x8 plate! just wondering about the sizes for the screws so I can put it on
    robotjones ·  February 2011
  • Which SMD for Mk?
    Would these work, or do you know of some? I'm not sure of the specifications I need for voltage, current, etc. http://www.altronics.com.au/index.asp?area=item&id=Y0162
    robotjones ·  January 2011
  • Diodes: are the 40h & mk same?
    thanks b!
    robotjones ·  December 2010
  • button presses dont work - only certain apps
    emergency, I have been experiencing this problem as well. When I run mlr or mlrv I get some of my buttons responding but not all and I can't launch clips, same with the dj app and sevenup. when I run polygome I hear the sounds when I press …
    robotjones ·  December 2010
  • Apps kind of working
    deanjkd - new mk, I set up cable like #1 picture from mk assembly http://docs.monome.org/lib/exe/detail.php?id=tech:mk:assembly&media=tech:mk:assembly:mk-driver14.jpg flplsx- Which joints, LEDs, drivers or both?
    robotjones ·  November 2010
  • Apps kind of working
    In monome test most of them show up, there's a row out and a few others, rest are on. Don't understand adc and enc meters: not getting any response from them. This is mk kit from July 2010
    robotjones ·  November 2010