jessemiller

  • new grid.
    Does two tone refer to the aluminum? Or to two different LED levels for vari-brightness?
    jessemiller ·  January 2015
  • white whale 1.2 update
    Yes, it seems to be playing beyond the series end point, but when it starts doing it I can't reset the start point or end point and that is when it seems to go into some sort of problem and shuts down.
    jessemiller ·  November 2014
  • white whale 1.2 update
    I've been running into some sort of glitch in series mode. Sometimes when I try to set the end point of a series it doesn't work and about 30 seconds later the whole sequence stops running and all the LEDs on the grid go off. I have to pow…
    jessemiller ·  November 2014
  • Problem with USB connectivity
    Installed latest serialosc and that seems to have solved it. thanks!
    jessemiller ·  October 2014
  • white whale!
    Are you using an external power source? I noticed that without an external power source not all the buttons on my grid worked, but with the extra power supply everything worked fine.
    jessemiller ·  October 2014
  • White whale swing?
    does anyone here use a Dark Time sequencer? I'm using that as my clock output into the white whale and I can get it to swing. When I adjust the shuffle and use the Dark Time to generate gate triggers it will shuffle, but when triggering the gat…
    jessemiller ·  October 2014
  • White whale swing?
    It would be really nice to see this as an added feature in any future updates
    jessemiller ·  October 2014
  • Problem with USB connectivity
    I should mention that I am running this with the airport turned off
    jessemiller ·  October 2014
  • white whale!
    Wow, there's a lot to this. Can't wait to try it. Adding a feature for swing would be a really nice addition.
    jessemiller ·  September 2014
  • white whale!
    This looks like something I'd definitely use, but my 128 doesn't have variable brightness. How hard would this be to operate without the vari-bright LED feedback? With regards to using the Arc with CV you can do it with a program like Sil…
    jessemiller ·  September 2014
  • Video - monome - Modular improvisation
    Yes, that is a minitaur. It is the synth sound that enters around 0:48. It is a pretty simple synth and only makes a few limited sounds with a limited range - but, can be programmed really quickly so I like it for live improvisations and for that cl…
    jessemiller ·  May 2014
  • monome_sum
    I can't seem to figure out how to turn off all the delay and reverb. i have all space/reverb/delay settings at 0
    jessemiller ·  April 2014
  • tilt to midi serielosc??
    @thekid you want just the tilt part and none of the midi buttons?
    jessemiller ·  December 2013
  • Monome not populating
    I reinstall Max again and now it works. So, I still don't know what the issue was, but at least it is working now. Thanks for the help.
    jessemiller ·  December 2013
  • Monome not populating
    I started getting a different issue. I copied the serialosc and zeroconf externals to the max folder. This Mac is 10.7, 32 bit. At first my issue was just with the zeroconf, fixed that but then the monome stopped connecting to any patch. I'…
    jessemiller ·  December 2013
  • pages 2 alpha release
    after reinstalling max, live and pages and following all the setup set again Pages no longer discovers my monome when i try to set configurations. any ideas?
    jessemiller ·  December 2013
  • Refresh SerialOsc bpatcher?
    So, now my M4L patch sees the monome, but Pages is not discovering the device. I did all the steps to reinstall Pages and still have the same problem.
    jessemiller ·  December 2013
  • Refresh SerialOsc bpatcher?
    Thanks, that worked. I am running pages.
    jessemiller ·  December 2013
  • Refresh SerialOsc bpatcher?
    I'm getting the message zeroconf.service: No such object and can't connect to the monome Problem started when I reinstall Max5 and Live. On runtime it still connects fine.
    jessemiller ·  December 2013
  • tilt to midi serielosc??
    I'm still fairly green at writing Max Patches, but I modified galapoose's angles and put it with the standard MIDI app for my 128. I took out the Z-axis data stream - I'm not even sure where that comes from. Button 14 5 turns on Y, …
    jessemiller ·  December 2013
  • WTB: Arc 2 in the US
    sent you a message. i have one in Philly that i could sell.
    jessemiller ·  December 2013
  • tilt to midi serielosc??
    Yeah, I have a newer arc without the press feature. Unfortunately I've never done any Java programming.
    jessemiller ·  December 2013
  • Umenu Loadmess
    thanks
    jessemiller ·  December 2013
  • Umenu Loadmess
    I guess you have to use the Umenu's list number, is it possible to do it with text?
    jessemiller ·  December 2013
  • tilt to midi serielosc??
    how do you record movements on the arc? also, i'm confused about tilt, is that built into one of these groovy pages?
    jessemiller ·  December 2013
  • tilt to midi serielosc??
    never mind, i think i've got it figured out
    jessemiller ·  December 2013
  • tilt to midi serielosc??
    i've never used a groovy page before. So, you create a page, load the script, and then what?
    jessemiller ·  December 2013
  • Max4Live help - Max editor won't open
    Yeah, that happens to me sometimes. Every once in a while repair permissions fixes that, but not always. I can't figure out what causes it.
    jessemiller ·  December 2013
  • Max4Live help - Max editor won't open
    No, not 64 bit. I don't have full Max, just Max4Live so I need to do the same type of opening scheme you describe. I managed to get it open to edit a problem with my application, but this problem keeps coming up so I'm still trying to fi…
    jessemiller ·  December 2013