Rodrigo

  • app : The Party Van
    Since the forum is getting moved, I've made a new thread on the lines forum here: http://llllllll.co/t/app-the-party-van/247
    Rodrigo ·  April 2015
  • karma~ (sampler/looper for The Party Van) beta
    github repo is made as well, but still not packaged with a release. The .c's and xcodes are there though. https://github.com/rconstanzo/karma
    Rodrigo ·  March 2015
  • karma~ (sampler/looper for The Party Van) beta
    Yeah I'll have a proper page for it. I don't want to link link to it properly yet until the tutorial video is done. I'd want it to all come out at once that way. So currently working on the vid. Just wanted to post the "done&quo…
    Rodrigo ·  March 2015
  • karma~ (sampler/looper for The Party Van) beta
    Ok, here's the 1.0 release ready version. Not doing a full on release until the tutorial vid is ready, but this is it for the code. The helpfile also has a full on reference doc on the final tab too. As a reminder, there are 2 versions of the …
    Rodrigo ·  March 2015
  • app : The Party Van
    There's not an organized list as I never anticipated opening it up. That being said, I do intend on making the OSC messages generic at some point, so it always follows a pattern (/party/effects/chopper/rate 0.3). It's not far from that now…
    Rodrigo ·  March 2015
  • app : The Party Van
    Yeah I saw the selectable thing. I don't know if I'd go that far with it, but being able to switch while performing is something I want to look into later on. At the moment it cuts audio every time you change a slot. Not idea. Hmm, don�…
    Rodrigo ·  March 2015
  • app : The Party Van
    @elquinto Yeah I built the deadzone in, but I haven't really needed it. When it's important I've programmed it into the code elsewhere, but I figured if someone's controller was old/beat, that that would be handy. @shimoda Ah th…
    Rodrigo ·  March 2015
  • app : The Party Van
    One unfortunate thing about the way Max is setup up is that the more complicated patches get more and more abstracted. For example TPV is over 100 files. So nothing 'makes sense' just by looking at it. You can't really just open up on…
    Rodrigo ·  March 2015
  • app : The Party Van
    Hehe, I figured that might be a desirable module. I've never been into delay, but people really like them. I was leaning towards something with lots of 'character'. So the main stuff would be the saturation/wow/flutter/compression st…
    Rodrigo ·  March 2015
  • app : The Party Van
    It's an xbox360 controller. I really like the shape/layout of the xbox controller, it's easy to use with the computer, and high resolution controls (all 16bit).
    Rodrigo ·  March 2015
  • app : The Party Van
    Here's a teaser pic for how the selectable fx slots will work in the upcoming gamepad patch (and eventually in the party van). You click on the name of the effect, and you can load any effect into that slot. This also opens up the possibility …
    Rodrigo ·  March 2015
  • app : The Party Van
    @strettara Thanks! @okovoko I've not gotten it working in Max7 yet, so still work it in Max6 only for now. On a somewhat related note, the mp3ification will finally work on windows in the next version AND I've been doing massive improveme…
    Rodrigo ·  March 2015
  • karma~ (sampler/looper for The Party Van) beta
    So just regular play/record stuff in an .amxd? Were you switching polybuffers on the fly, or just addressing a single buffer from polybuffer? And karma itself was inside a poly?
    Rodrigo ·  March 2015
  • karma~ (sampler/looper for The Party Van) beta
    @elquinto Can you post the patch that you were using? (in M4L inside a poly?) And was it crashing when you did something specific or just under normal usage there?
    Rodrigo ·  March 2015
  • karma~ (sampler/looper for The Party Van) beta
    Yeah. Gonna git it once we're at the release point (might be next compile). Didn't want to clog up a github with the months of back and forths!
    Rodrigo ·  February 2015
  • new commission for hardware- modular modules + arduino?
    Your best bet might be looking at some of the existing monome modules and seeing if they can control the folktek thing in a manner you want OR looking at some of the expert-sleepers stuff (http://www.expert-sleepers.co.uk/es3.html) and using the mon…
    Rodrigo ·  February 2015
  • attach your grid to an arduino.
    Pd + raspi is probably a shorter route to that. I've been eyeballing the latest raspi to mess around with embedded stuff.
    Rodrigo ·  February 2015
  • Old Rodrigo performance question
    Thanks! Yeah the condenser mic that close picks up a weird combination of things. Very much like a microscope, and once you through in higher gain for feedback, it becomes a complex/reactionary instrument. To be honest, I don't listen to much…
    Rodrigo ·  February 2015
  • Old Rodrigo performance question
    Oh, and to be clear, the party van isn't doing anything (as far as that sound is concerned) there. That's just the sound of a mic like that up against a drum head. The 2nd vid has more distortion on (different patch, but same distortion …
    Rodrigo ·  February 2015
  • Old Rodrigo performance question
    So that's a condensor mic, a Naiant omni mic: http://naiant.com/studio-electronics-products/microphones/x-x-omnidirectional-lapel-condenser-microphone/ It's also a 2-ply (emperor) head, so it's two plys of head with a film of oil bet…
    Rodrigo ·  February 2015
  • app : The Party Van
    Glad to hear it's working well for you! I personally never had any issues moving to Yosemite with monome/tpv stuff, not sure why. Still sorting out issues with Max7 and tpv, but that's another story.
    Rodrigo ·  February 2015
  • app : The Party Van
    Lol, I'll add that to the manual now. Sorry!
    Rodrigo ·  February 2015
  • app : The Party Van
    Yeah it's MIDI channel 2. There was a reason for this, but I forget. Probably something to do with me sometimes using a MIDI keyboard with the patch and not wanting to cross wires. Good catch on the CC51. There was a misconnected patch cord. H…
    Rodrigo ·  February 2015
  • karma~ (sampler/looper for The Party Van) beta
    @beo The error message for jongly is a change in how to the demosound bpatcher works in Max7. Loading a file manually should work fine. What do you mean "the loop is inconsistent"? For varispeed, if you record at 0.5 and play back, it wi…
    Rodrigo ·  February 2015
  • karma~ (sampler/looper for The Party Van) beta
    Yeah exactly, it's a general purpose sampler/looper, which has the functions I want/need for the party van, and other patches (I'm nearing completion on a really sweet xbox controller-based patch, heavily built around karma~).
    Rodrigo ·  February 2015
  • app : The Party Van
    Glad you've dug it. The num key is probably due to the keyboard layout. Not super important to the functionality of the patch as the auto-jump shows the same behavior. I haven't spoken to raja about the dirac stuff in Max7, so I don'…
    Rodrigo ·  February 2015
  • app : The Party Van
    So an external raja and I have been working on for the last few months is pretty much ready to release. I've made a thorough help file, and am in the middle of doing a tutorial video, but for now, I want to do a mini release here on the forum t…
    Rodrigo ·  February 2015
  • latest tracks/videos
    Here's my latest jams, again, no monome, but still cool methinks. http://www.rodrigoconstanzo.com/2015/02/everything-everything-at-once-once-3/
    Rodrigo ·  February 2015
  • app : The Party Van
    The MIDI learn should save a settings file automatically, and load it each time. Same goes for the preset system.
    Rodrigo ·  January 2015
  • app : The Party Van
    I didn't write the MIDI learn code, it's from the c74 forum, and Benjamin added it to like v02 years ago, and I kept it from there on. I don't use it, but what spacelord said sounds about right.
    Rodrigo ·  January 2015